2017+ Ford Super Duty Dual Fog Light Brackets for RIGID Lights 2017+ Ford Super Duty Dual Fog Light Brackets for RIGID Lights KD Fabworks FREE SHIPPING! These brackets will fit two 3" Rigid Industries D-Series lights in each factory fog light bumper opening.  Brackets are laser cut and CNC formed out of 304 Stainless Steel, then powder coated a low gloss textured black finish.   All necessary hardware is included for an easy bolt-in installation.  Kits include a pair of light brackets that attach to factory locations, and a shroud that will fill the gap around the lights. A great option for this setup is to run a pair of the Rigid D-Series SAE compliant lights on the factory switch using the TR-H10 adapter harnesses.  Then run a set of Dually D-Series Driving lights lights off of an Upfitter switch (if equipped) or two a separate switch. We do not recommend Hyperspot or Diffused lights for the front bumper. Hyperspot lights should be mounted higher than the fog opening for long distance usability. Diffused lights should not be used for a forward projection light. You cannot run 4 Rigid lights with the factory wiring.  Kit include two (2) harnesses to be able to plug one (1) pair of lights into the factory wiring.  Please select which lights you plan to use in the drop down during checkout.  304 stainless steel construction Stainless steel hardware included Laser cut and CNC formed Low-gloss black powder coated finish KIT CONTENTS: 1 Drivers side bracket 1 Passenger side bracket 1 Drivers side shroud 1 Passenger side shroud (2) TR-H10 Plug-and-Play wiring adapters (6) Stainless steel button head bolts (6) Stainless steel Nyloc nuts (12) Stainless steel washers Instructions Click Here for PDF Installation Instructions

2017+ Ford Super Duty Dual Fog Light Brackets for RIGID Lights

$ 179.99
In Stock

  • FREE SHIPPING* OVER $75

  • BUY NOW PAY LATER

  • EXPERT PHONE SUPPORT

FREE SHIPPING!

These brackets will fit two 3" Rigid Industries D-Series lights in each factory fog light bumper opening.  Brackets are laser cut and CNC formed out of 304 Stainless Steel, then powder coated a low gloss textured black finish.   All necessary hardware is included for an easy bolt-in installation.  Kits include a pair of light brackets that attach to factory locations, and a shroud that will fill the gap around the lights.

A great option for this setup is to run a pair of the Rigid D-Series SAE compliant lights on the factory switch using the TR-H10 adapter harnesses.  Then run a set of Dually D-Series Driving lights lights off of an Upfitter switch (if equipped) or two a separate switch.
We do not recommend Hyperspot or Diffused lights for the front bumper. Hyperspot lights should be mounted higher than the fog opening for long distance usability. Diffused lights should not be used for a forward projection light.
You cannot run 4 Rigid lights with the factory wiring.  Kit include two (2) harnesses to be able to plug one (1) pair of lights into the factory wiring.  Please select which lights you plan to use in the drop down during checkout. 
  • 304 stainless steel construction
  • Stainless steel hardware included
  • Laser cut and CNC formed
  • Low-gloss black powder coated finish
KIT CONTENTS:
  • 1 Drivers side bracket
  • 1 Passenger side bracket
  • 1 Drivers side shroud
  • 1 Passenger side shroud
  • (2) TR-H10 Plug-and-Play wiring adapters
  • (6) Stainless steel button head bolts
  • (6) Stainless steel Nyloc nuts
  • (12) Stainless steel washers
  • Instructions

      FREE SHIPPING!

      These brackets will fit two 3" Rigid Industries D-Series lights in each factory fog light bumper opening.  Brackets are laser cut and CNC formed out of 304 Stainless Steel, then powder coated a low gloss textured black finish.   All necessary hardware is included for an easy bolt-in installation.  Kits include a pair of light brackets that attach to factory locations, and a shroud that will fill the gap around the lights.
      A great option for this setup is to run a pair of the Rigid D-Series SAE compliant lights on the factory switch using the TR-H10 adapter harnesses.  Then run a set of Dually D-Series Driving lights lights off of an Upfitter switch (if equipped) or two a separate switch. We do not recommend Hyperspot or Diffused lights for the front bumper. Hyperspot lights should be mounted higher than the fog opening for long distance usability. Diffused lights should not be used for a forward projection light. You cannot run 4 Rigid lights with the factory wiring.  Kit include two (2) harnesses to be able to plug one (1) pair of lights into the factory wiring.  Please select which lights you plan to use in the drop down during checkout. 
      • 304 stainless steel construction
      • Stainless steel hardware included
      • Laser cut and CNC formed
      • Low-gloss black powder coated finish
      KIT CONTENTS:
      • 1 Drivers side bracket
      • 1 Passenger side bracket
      • 1 Drivers side shroud
      • 1 Passenger side shroud
      • (2) TR-H10 Plug-and-Play wiring adapters
      • (6) Stainless steel button head bolts
      • (6) Stainless steel Nyloc nuts
      • (12) Stainless steel washers
      • Instructions
        Click Here for PDF Installation Instructions

          Shipping:

          We offer free shipping on orders over $75 unless it includes certain items that require LTL Freight. Once you proceed through the checkout process, shipping will automatically be calculated toward the end.

          Returns:

          Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Gift cards are not eligible for return.

          To see more details about our policies for shipping, exchanges, returns, and refunds, view them here.